Scroll To Top

30 Caliber – TBAC 30BAS (Brake Attached)

(No reviews yet) Write a Review

30 Caliber – TBAC 30BAS (Brake Attached)

Please call Patriot Defense about the process for ordering an NFA item. We can help every step of the way, to ensure it is a fast, hassle free experience.

The model 30BAS is the seven-inch “Short” version of our brake-attach 30BA suppressor. It is two inches shorter and three ounces lighter than the 30BA. It only gives up approximately 2-3 dB suppression for a noticeably smaller and lighter format. The 30BAS is designed to mount over our muzzle brake. It is particularly suited to applications where the rifle will be shot suppressed and unsuppressed, and a brake is desired when shooting without the suppressor.

The 30BAS shares the same mount as the 30BA, which was developed to meet the requirement that some customers have for a suppressor that mounts over a muzzle device. We haven’t found a “quick mount” on the market that meets our accuracy and repeatability requirements, so we developed the BA series to mount over our brake and provide the same repeatability as our direct thread attach suppressors, like the 30P-1. The 30BAS features a conical shoulder for rock solid POI repeatability and to make sure it never comes loose.

The 30BAS is ideal for competition or hunting rifles when the absolute suppression level is not as important as having a smaller, compact suppressor. It was designed around .308 and similar capacity cartridges such as .243 Winchester .260 Remington, 6.5 Creedmoor, 6.5×47 Lapua. It is strength-rated up to .300 Winchester Magnum.

The 30BA brake will accept the 338BA suppressor, so with a .30 caliber brake on your .308 and a .338 brake on your .338 Lapua Magnum, you can use a single 338BA suppressor on both. The 30BAS suppressor will not fit on a 338BA brake.

The 30BAS is constructed of titanium with a fully-welded baffle core. This material and construction provides a great strength to weight ratio. It can take whatever your precision rifle can dish out.

Special Features

Brake-in-suppressor design
Conical shoulder surface
100% titanium construction
360-degree fully-welded baffle core
Helical Baffle Technology
Magnum rated
Rock-Solid POI Repeatability

Application Notes

This suppressor is strength-rated for 6.5-284, 7mm Rem Mag, 7mm WSM, .300 Win Mag. Not recommended for use with magnum cartridges with barrel lengths shorter than 22 inches. 7 mm Magnums OK not to exceed 72 grains powder. .30 cal Magnums OK not to exceed 82 grains powder. For questions about a particular rifle/load combination please contact us.



Caliber .30 caliber, up to .300 Winchester Magnum ; Material Titanium ; Brake Material Hardened stainless steel ; Length 7 inches ; Diameter 1.5 inches ; Weight 12.7 ounces ; Brake Threads 1/2-28*, 5/8-24, 9/16-24, 3/4-20, 3/4-24, 3/4-28, M18x1.0, M18x1.5 ; * Note: The 1/2-28 30BA brake has a .223 caliber aperture! ; Finish Black CeraKote; OD Green or FDE available ; Use Precision/Long-range rifle, bolt or semi-auto