Scroll To Top

SPUHR SP-4003B: 34mm Picatinny Mount 0MIL/0MOA – 1.5″

(No reviews yet) Write a Review

SPUHR SP-4003B: 34mm Picatinny Mount 0MIL/0MOA – 1.5″


Extremely sturdy scope mount, with possibility to attach multiple optical accessories directly to the mount. Built-in level. 45-degree split of the rings provides unobstructed view of the knobs.

SPUHR SP-4003B – 34mm Picatinny Mount 0MIL/0MOA – 1.5″

Ring Size: 34mm

Cant/Tilt:0 Mils / 0 MOA

Height: 38mm/1.5″

Length: 147mm/5.79″


Prevents damage on scope due to flexing during heavy recoil or rough environment. The snipers rifle and the spotters carbine can have the same mount, enabling the use of same equipment and accessories. Rings are grooved inside to get a better grip of the scope and enabling gluing of the scope. The mount is milled out of one billet of material instead of being screwed together of small parts.

Scope Rotation

Patent pending solution for indexing the rotation of the scope, using an included tool/gauge to index the scope correctly to the mount and gun. Important since a incorrectly indexed scope unintentionally will also have a sideways adjusted point of impact and since it will be adjusted sideways when it is adjusted for elevation.

Mounting Placements

Traditionally lasers have been mounted on the forend of the rifle, a solution with drawbacks. For the same reasons you don′t want your barrel to touch the forend you don′t want the sights to be mounted on the forend. Our mounting system have minimum seven interfaces for accessories and the laser can easily be mounted on the mount, given the advantage of undisturbed laser and the weight more central on the gun instead of forward.

Accessible and Readable Dials

The rings are cut 45 degrees instead of horizontal as usual, providing several advantages. The screws holding the parts together are not in the way of the knobs, thus the shooter can quickly determine the settings of the knobs. It also gives the shooter a horizontal line that not directly are seen but is existing and helping the shooter not torotate his gun unintentionally. The rings have index marks on the top and right side, making low knobs more easily readable.



SP-4006 – Mount for Picatinny Rail – Ring size 34mm – Cant 0 MIL/0 MOA – Height 34 mm/1,34" – Lenght:121 mm/4,76"