PARTS

DescriptionThe AD-BP Bipod Mount enables you to attach a Harris bipod to your railed forearm. Not compatible with the Tac Lever ( Lever interferes with the bipod itself ). It is precision machined from 6061 T6 aluminum and finished in hard coat T3...

Perfection series S-7 tool steel firing pin for all firing pin block CZ’s Fits all full size SP-01 manual safety and SP-01 decocker , P-01, PCR, 75B, 75B Compact, RAMI, 40B, P-07/09, etc Heat treated to RC45 Includes a matching firing pin...

75850 Shadow 2 Reach Reduction Kit Shortens Reset in Double and Single Action USPSA Legal Includes (2) Hammer Pins:  (1 x HPIN and 1 x 75009) RRK-T2 Reach Reduction Kit Type 2 RRK-T2 must be used with either our SRS-1 or SRS-2 (Short...

A CGW exclusive part that revolutionized CZ home gunsmithing.  Allows anyone to drop in a high performance hammer and effortlessly establish the perfect clearance between the sear nose and manual safety.  Made from premium high carbon steel,...

CGW | Barrel Bushing For SP-01 & Shadow Black Hard Chrome

CZ SP-01 Phantom Floating Trigger Pin  (75920) was previously called Canik Floating Trigger Pin (30600) Part Number Changed Contributes to a smoother action.

CGW’s famous decocker race hammer.  Starts as a solid carbon steel billet blank, then it is Electron Discharge Machined and finish ground to perfection.  Finished in a deep black oxide and heat treated to RC53.  Produces,...

  61050 Extended Firing Pin Perfection series S-7 tool steel firing pin for all firing pin block CZ’s. Made in the USA and heat treated to RC45 & includes a matching firing pin spring. Fits all full size SP-01 manual safety and SP-01...

Tempered spring steel firing pin retaining pin.  Our 61100 acts like a mini-shock absorber and can withstand repeated impacts from the firing pin.  Cushions the firing pin shoulder from damage. Must use this special spring pin for the...

Canik’s own floating trigger pin.  Ditch that cheap roll pin for this ground and heat treated LIFETIME warranty pin.  Contributes to a smoother action.  

Very popular music wire : HS-8500, 8.5# hammer spring color coded “white”. (For use with Federal Primers Only) HS-1200, 11.5# hammer spring color coded “black” HS-13, 13# hammer spring color coded...

CGW | HPIN Hammer Pin  

RHK Race Hammer Kit Hammer with adjustable sear Typical SA drop in pull weight is 3.6 – 3.12 pounds

Manual safety blue steel hammer Machined from a solid high carbon steel billet blank using the Electron Discharge Machining method Precision ground Heat treated to RC53 (OEM is RC45) Drops in and produces a 3lb 8oz single action (on average

Must be used with CGW reduced power hammer springs HS-15, HS-13, HS-12000, & HS-8500 For use in the Shadow series and 85  metal framed series only ( Shadow and 85c ONLY)

Music wire reduced power firing pin block plunger spring. This spring very light, yet 100% reliable, virtually makes the feel of the FP block plunger go away. Reduced Power Plunger SpringPart # RP-FPBSITAR RegulatedMade In USA

CGW | S-Spacer Sear Spacer  Sear spacer, necessary when using CGW’s adjustable sear, part number AS-B. The spacer is also used if you are using the narrow factory “B” series sear in place of the wide body Shadow/Tactical...

Type 2 CGW disco, fits all firing pin block equipped CZ’s.  Like Type 1, requires no fitting 90% of the time*.  NOTE:  Type 2 will only work in CZ’s with the SRS-1 or 2.  Fits SP-01, P-01, PCR, RAMI, Etc. ...

New Shadow 2 ultra-short reset disconnector.   After extensive testing, we have engineered a new disco just for the Shadow 2.  This part will drop into most S-2’s and require no fitting, however, due to the timing variations from...

Tuners Pack 5 premium color coded USA Made music wire recoil springs 10#/white 11#/yellow 12#/red 13#/green 14#/gray   Includes “How to select the proper recoil spring” insert card.  Fits full size CZ’s only,...