CZ - USA PARTS

Perfection series S-7 tool steel firing pin for all firing pin block CZ’s Fits all full size SP-01 manual safety and SP-01 decocker , P-01, PCR, 75B, 75B Compact, RAMI, 40B, P-07/09, etc Heat treated to RC45 Includes a matching firing pin...

RHK Race Hammer Kit Hammer with adjustable sear Typical SA drop in pull weight is 3.6 – 3.12 pounds

75850 Shadow 2 Reach Reduction Kit Shortens Reset in Double and Single Action USPSA Legal Includes (2) Hammer Pins:  (1 x HPIN and 1 x 75009) RRK-T2 Reach Reduction Kit Type 2 RRK-T2 must be used with either our SRS-1 or SRS-2 (Short...

A CGW exclusive part that revolutionized CZ home gunsmithing.  Allows anyone to drop in a high performance hammer and effortlessly establish the perfect clearance between the sear nose and manual safety.  Made from premium high carbon steel,...

CGW | Barrel Bushing For SP-01 & Shadow Black Hard Chrome

Contributes to a smoother action.

CGW’s famous decocker race hammer.  Starts as a solid carbon steel billet blank, then it is Electron Discharge Machined and finish ground to perfection.  Finished in a deep black oxide and heat treated to RC53.  Produces,...

  61050 Extended Firing Pin Perfection series S-7 tool steel firing pin for all firing pin block CZ’s. Made in the USA and heat treated to RC45 & includes a matching firing pin spring. Fits all full size SP-01 manual safety and SP-01...

Tempered spring steel firing pin retaining pin.  Our 61100 acts like a mini-shock absorber and can withstand repeated impacts from the firing pin.  Cushions the firing pin shoulder from damage. Must use this special spring pin for the...

Canik’s own floating trigger pin.  Ditch that cheap roll pin for this ground and heat treated LIFETIME warranty pin.  Contributes to a smoother action.  

Very popular music wire : HS-8500, 8.5# hammer spring color coded “white”. (For use with Federal Primers Only) HS-1200, 11.5# hammer spring color coded “black” HS-13, 13# hammer spring color coded...

Manual safety blue steel hammer Machined from a solid high carbon steel billet blank using the Electron Discharge Machining method Precision ground Heat treated to RC53 (OEM is RC45) Drops in and produces a 3lb 8oz single action (on average

Must be used with CGW reduced power hammer springs HS-15, HS-13, HS-12000, & HS-8500 For use in the Shadow series and 85  metal framed series only ( Shadow and 85c ONLY)

Type 2 CGW disco, fits all firing pin block equipped CZ’s.  Like Type 1, requires no fitting 90% of the time*.  NOTE:  Type 2 will only work in CZ’s with the SRS-1 or 2.  Fits SP-01, P-01, PCR, RAMI, Etc. ...

New Shadow 2 ultra-short reset disconnector.   After extensive testing, we have engineered a new disco just for the Shadow 2.  This part will drop into most S-2’s and require no fitting, however, due to the timing variations from...

Tuners Pack 5 premium color coded USA Made music wire recoil springs 10#/white 11#/yellow 12#/red 13#/green 14#/gray   Includes “How to select the proper recoil spring” insert card.  Fits full size CZ’s only,...

CZ | 9mm Extractor - All 75 and 85 Models (0420066302)  EXTRACTOR 9MMCOMPATIBLE WITH ALL 75 AND 85 MODELS IN 9MMNOT FOR P-07 DUTYGUNSMITH INSTALLATION IS RECOMMENDED Product Number: 0420066302

CZ | Adjustable Rear Sight - Shadow 2 (10810101) ADJUSTABLE REAR SIGHT SHADOW 2INSTALLATION BY A QUALIFIED GUNSMITH IS RECOMMENDED Product Number: 10810101

CZ | Ambi Flat Safety - 75 & SP-01 Shadow (10911224) THIN SAFTIES FOR CZ SP-01 SHADOW MODELS ONLYSOLD AS A SET ONLYFITTING WILL BE REQUIREDGUNSMITH INSTALLATION IS STRONGLY RECOMMENDED Product Number: 10911224

CZ | Competition Hammer SA/DA - 75 & SP-01 Shadow (19504)  COMPETITION HAMMER SA/DAFITS 75/85 FULL SIZE AND COMPACT MODELS, SP-01 MODELS, 97BNOT COMPATIBLE WITH DECOCKING MODELSGUNSMITH INSTALLATION IS RECOMMENDED Product Number: 19504