null

Scroll To Top

PD | Tanfoglio Interrupter R7

(6 reviews) Write a Review

$45.95
Patriot Defense | Tanfoglio Interrupter R7

Patriot Defense | Tanfoglio Interrupter R7

 

Parts included: R7 Interrupter & Pin

NOTE: For a trouble free install with the R7 interrupter we recommend you have the Xtreme Sear and Titan Hammer installed on your pistol. These two items are a must if your looking for a trouble free install on your firearm.

Please read the below product description before purchasing. Some pistols will require fitting due to the vast amount of machining tolerance variations in these pistols. The supplied pin is designed to float in the hammer pin holes, use grease to aid in assembly and keep the pin from falling out. Please contact us should you have any question regarding fitting or modifying your R7 interrupter. 

The number one complaint Tanfoglio owners have about their guns…..…the trigger, and its pre-travel.

The Patriot Defense Optimized R7 Interrupter was conceptualized and created off the extremely popular BOLO interrupter. Its sole purpose was to give those who are experienced with the Tanfogflio's inner workings the ability to have a gunsmith fit part with minimum fitting. Precision CNC machined and heat treated for optimum life and performance to the end user the R7 Interrupter was machined specifically for the steel frame line of Tanfoglio pistols. Due to feedback we’ve received on the most current configuration of Tanfoglio pistols; most people have the Extreme Sear, and Titan hammer already installed in their pistol. We recommend you already have it installed as well to get the most out of your Tanfoglio firearm and a trouble free install. As mentioned above, with so many changes over the years to the tanfoglio line of pistols the BOLO has required more and more fitting. We set out to have an interrupter that's gunsmith fit with the majority of the work done for the end user. So which one is for you, see below. 

 

R5- Easy install, very minimal fitting if any is required at all, pre-travel is reduced from factory setup, small amount of take up and solid reset. 

R7- Intermediate install & fitting (material removal will be required from front face of the "leg"), zero- pre-travel can be achieved, and solid reset.

BOLO- Advanced install & fitting required (material will need to be removed from inner curve, nose of the interrupter, and possibly the edge of the wing), zero pre-travel can be achieved, and audible reset.

 

Note- Installation and fitting of the BOLO is no longer offered, only qualified gunsmith should install this part. 

 

Installation Instructions

 

Important Warning: Modification to your firearm may void manufacturers warranty. This product must be installed by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation.

6 Reviews Hide Reviews Show Reviews

  • 5
    3rd R7 success

    Posted by John on Jul 10th 2023

    Just installed my 3rd R7 in an old Stock 2 and it was the first one which required some minor fitting. The DA worked perfect had to fit a little for SA. Far easier than the BOLO. Thank you PD

    Fitted with extreme sear and Titan Hammer.

  • 5
    Excellent.

    Posted by david.koncur@gmail.com on Oct 9th 2022

    After fitting this, which did take a few hours to get everything functioning just the way I wanted, All pre travel has been eliminated! Not just some, ALL. Super short crisp SA pull and reset. Instructions were great and made the fitting process easy!

  • 5
    R7 disco is the way to go

    Posted by Dazhi Zhang on May 5th 2021

    I have fitted numerous BOLOs in the past. Recently I bought 2 of these R7, and put them on 2 new Stock 2s. They both dropped right in with zero manual fitting needed, and produced less pre travel and shorter reset than all my previously manually tuned BOLOs. I am very impressed. What's even better than BOLOs is that R7 resulted in longer DA pull as is, while I had to manually fit the BOLOs to get longer DA pull in order to set off CCI primers on DA. I will be getting the R7 exclusively going forward for my future Stock 2s. FYI - I use Titan hammers and Extreme sears.

  • 5
    R7 on DA/SA STOCK-1

    Posted by Michael Smith on Jan 25th 2021

    I have done a few BOLOs and decided to try the R7 to test it out. I did get a tiny bit of take-up, but the solid and loud reset is fantastic! I fitted the R7 in three test fits. The BOLO I'm doing now is going on twenty test fits and still needs one or two more to get perfect. I'll be buying the R7 from now on...

  • 5
    R7 Disconnectors. S.A. Open Tanfoglio Build.

    Posted by Archangel on Oct 20th 2020

    This is definitely the way to go for Tanfo triggers. Zero.. travel and tiny reset combined with the Xtreme Sear. Part is exceptionally well machined and the install is a breeze with the right tools and some confidence! The CS has been top notch also. If you have questions the guys and gals at PD do not Hesitate to help or offer advice!

  • 5
    R7 interrupter

    Posted by Amazing. Exactly what your DA tanfo needs. on Sep 9th 2020

    This is the part I have been waiting for. This version did take some fitting. Take-up is almost zero. Reset is amazing and I can split the gun like an automatic now!