Tanfoglio Witness Magazine Catch Custom Extended
- Factory Part
- Fits all Tanfoglio Models
Tanfoglio Witness Magazine Catch Custom Extended
The size of this mag release is perfect imo. I can now reach it without breaking my grip and it does not get accidentally engaged by my support hand while firing. It's now very similar in size and feel to shadow 2 mag release. You might need to take some material off the grip directly under the paddle depending on thickness. Seems to be designed for use with thin grips. Excellent product!
Easy to install, you don’t actually have to rip your TANFO apart to slap this in. Just push the plunger down and twist it 180 degrees and out with a pair of needle nose pliers. Be sure to cover the magazine release hole with tape so the spring and plunger don’t go flying.
Tanfoglio | Extended Magazine Catch
Tanfoglio | Extended Magazine Catch Black (03GAN00005B) Silver (03GAN00005S) Note: Comes on the Stock 2 and Defiant Stock Master Models
Tanfoglio | Magazine Catch Spring (03MOL00011)
Tanfoglio | Magazine Catch Spring (03MOL00011) Previous Part No.: EAA-301730 (6.8)
Tanfoglio | Magazine Catch Guide (03GMG00001B)
Tanfoglio | Magazine Catch Guide (03GMG00001B) Old Part No.: Witness Magazine Catch Plunger (6.7) (301729)
Tanfoglio | Witness Magazine Catch (6.6) (301728)
EAA / Tanfoglio Witness Magazine Catch (6.6)
Mec-Gar | Tanfoglio Magazine Small Frame - Extended - 24rd - 9mm (05CAR00053)
Mec-Gar | Tanfoglio Extended Magazine 25rd 9mm Small Frame (05CAR00053)
